Amana Tool 46483-K Solid Carbide Spektra™ Extreme Tool Life Coated Double Straight Flute Plastic Cutting 1/4 Diameter x 1 x 1/4 Inch Shank
SKU: 46483-K
| (D) Diameter: | 1/4" |
|---|---|
| (B) Cutting Height: | 1" |
| (d) Shank: | 1/4" |
| (L) Overall Length: | 2-1/2" |
| Flutes: | 3 |
- Overview
- Tool Data Downloads
Overview
Used for routing harder and more rigid plastics in the following materials: Acrylic, Acetal, Nylon, PVC, ABS, Phenolic, Corian, Poly (methyl methacrylate) (PMMA), Acrylic Stone, Coroplast®, etc.
Excellent for Cutting:
- Plastic
- Acetal
- Acrylic
- Acrylic Stone
- Acrylonitrile Butadiene Styrene (ABS)
- Alupanel®
- Copolymer
- Corian
- Coroplast®*
- Corrugated Polypropolyne
- Delrin
- Ethylene-Vinyl Acetate
- Foam Board
- Fomex®
- Gator Board
- High-Density Polyethylene (HDPE)
- High Impact Polystyrene (HIPS)
- Hydroxy-Terminated Polyether (HTPE)
- Low-Density Polyethylene (LDPE)
- LubX®
- Lucite
- Mechanical/Engineered Plastics
- Nitrite Rubber
- Nylon
- Perspex® Cast Acrylic Sheet
- Phenolic
- Plexiglas®
- Polyethylene (PE)
- Polyethylene Terephthalate (PET)
- Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
- Poly (methyl methacrylate) (PMMA)
- Polycarbonate
- Polypropylene (PP)
- Polyoxymethylene (POM), also known as Acetal, Polyacetal, and Polyformaldehyde.
- PVC
- Sign Foam
- StarBoard® (King StarBoard 'R') High-Density Polyethylene Sheet (HDPE)
- Styrene-Acrylonitrile
- Styrene-Butadiene Rubber (SBR)
- Styrene-Isoprene-Styrene (SIS)
- Teflon®
- Thermoplastic Polyolefin (TPO)
- Ultra High Molecular Weight Polyethylene (UHMW)
- Urethane
*A soft plastic cardboard made with super soft, super flexible PVC.
Our Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
- nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use, and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue-based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
Tool Data Downloads
Speed & Feed Rates
- Choosing a selection results in a full page refresh.
- Opens in a new window.