Parallel Bar Clamp K-Body Revo 12"

12" K Body REVOlution Parallel Bar Clamp, 3-3/4" Throat Depth

The best parallel clamp in the world just got better! How? By listening to you and building in features that provide the solutions you asked for. The new K Body REVOlution (KRE) is designed to clamp at 90 degrees to the rail with very large clamping surfaces. The ergonomic two-part handle includes a steel socket that allows one to apply clamping force using a hex key. While this helpful feature was designed for ease of clamping, it does allow one to provide more clamping force and is particularly helpful for those with wrist strength issues. The operating jaw has undergone some evolutionary changes as well. Position it where you want and start clamping. The easy set-up allows one to position the operating jaw where you want and, it will stay put during set up. The new BESSEY K Body REVOlution offers a load limit of 2200 lbs, an everyday clamping force of 1700 lbs, and sizes that range from 12 In. to 98 In. BESSEY. Simply better.

• Clamping Capacity | 12"
• Throat Depth | 3-3/4"
• Clamping Force | 1700 lbs.
• Approximate Weight | 4.76 lbs.
• Spreading Capacity | 10" - 15-5/16"

Features:

• Secure clamping force up to 1700 lbs.
• Designed to clamp at 90 degrees to the rail with very large clamping surfaces.
• Ergonomic two-component handle with steel socket for applying force with a hex key or driver when desired (Max Torque 17 Nm).
• Operating jaw that stays where you put it for easy setup. Position it where you like and apply clamping force.
• Three removable pressure caps are included, resistant to glue, paint, and solvents.
• Two workpiece supports prevent the clamped material from contacting the steel rail.
• Converts to spreading, no tools required, in seconds by removing the end stop and reversing the operating head.

Powerful with simple set up and operation

• For smooth opening, release any clamping pressure in place then, pivot the handle up and away from the rail then, slide the operating jaw to increase the opening.
• For closing and clamping, pivot the handle towards the rail, slide the jaw to the workpiece, and begin clamping.
• Operating jaw that stays where you put it for easy setup.