The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.
Features:
- Cutter replacement is done quickly and easily via a screw on the cutter spindle
- The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up
- Various routing depths can be realised by different cutter spindles
- Carbide-tipped cutters
- Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm
- The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
