- Amana Tool (269)
- Axiom Precision (0)
- CNC Routers (8)
- Accessories (18)
- CNC Bits (190)
- CNC Software (2)
- Bessey Tools (29)
- Bow Products (20)
- Cosmos Industrial (4)
- Dimar (0)
- Einhell (3)
- Excelsior (14)
- Felder (12)
- Festool (0)
- Festool New Products (9)
- Festool Abrasives (0)
- Planex Abrasive (4)
- D150 (6') Abrasive (5)
- D125 (5') Abrasive (5)
- D90 Abrasive (3)
- D93 Abrasive (2)
- FMI Bandsaw Blades (9)
- FS Tool (35)
- Fuji Spray (0)
- HVLP Spray Systems (29)
- HVLP Spray Guns (42)
- Air Cap Sets (18)
- Compressor Spray Guns (15)
- Hammer (9)
- King Industrial (115)
- Kreg Tool (59)
- Laguna Tools (49)
- Maksiwa (3)
- Manpa Tools (43)
- Mirka (0)
- Sanders (21)
- Drywall Sander (10)
- Mirka Abrasives (27)
- Dust Extractors (10)
- Sanding Pads (7)
- Next Wave CNC (26)
- Nova (5)
- Odie's Oil (40)
- Olson (13)
- Oneida Air (24)
- Powermatic (30)
- SawStop (0)
- Table Saws (19)
- Table Saw Accessories (20)
- Shaper Tools (21)
- Shop Fox / Woodstock (38)
- SuperMax Tools (38)
- TSO Products (42)
- Vectric (2)
- Viking Arm (3)
- VSM Abrasives (8)
- Wilton Tools (4)
- Yeti Tool SmartBench (0)
- Yeti SmartBench (12)
- CNC Software (2)
- CNC Router Bits (190)
To Receive E-mail Notifications
On All of Our Promotions
Laguna Revo 18|36 Lathe 110 Volt
SKU: MLAREVO 1836-110-150
The first feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe. The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well-known longevity and strength. Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings, you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle. The headstock and tailstock lock handles are situated on the back to eliminate any interruptions to your workflow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.
Features
- 1725 RPM TEFC Induction Motor
- Poly-Groove Drive Belt w EZ Access
- Spring Loaded Spindle Lock
- Engraved, Self-Ejecting Tailstock Quill
- Spindle Index # 14/36/48 w Lock
- Full-Length Headstock Travel
Motor: | 1.5HP, 110 Volt, 60 Hz |
---|---|
Recommended Breaker Size: | 20 Amp |
Maximum Outboard Swing: | 32" |
Swing over Banjo: | 13 1/2" |
Steel Bed: | ASTM A36 |
Spindle Taper: | MT#2 |
Swing over Bed: | 18" |
RPM Range High: | 135-3500 |
RPM Range Low: | 50-1300 |
Tailstock Quill: | 4 1/2" |
Floor to Spindle Center: | 41 1/2" w Pads |
Spindle Index #: | 14/36/48 w Lock |
Distance Between Centers: | 36" |
Headstock Through-Bore: | 3/8" |
Headstock Travel: | Full Length |
Tailstock Through-Bore: | 3/8" |
Spindle Size: | 1 1/4" X8 TPI RH |
Floor to Bed: | 32 1/2" w Pads |
Floor Space: | W 60" D 26" H 47" |
Weight (Net/Ship): | 427/480 Lbs. |
More from this collection
If you want to pick up items in store please call ahead to confirm availability.
Unless Otherwise Indicated All Prices Are F.O.B. Our Winnipeg Warehouse